Previous
Next
Alarm and Detection
อุปกรณ์ตรวจจับ และแจ้งเหตุเพลิงไหม้
เป็นอุปกรณ์ที่ทำหน้าที่แจ้งเตือน เมื่อมีเหตุเพลิงไหม้เกิดขึ้น
NOTIFIER Fire Alarm System
Agent Release Control Panel
ระบบแจ้งเหตุเพลิงไหม้ สามารถตรวจจับควันที่เกิดจากเหตุเพลิงไหม้
โดยส่วนใหญ่จะเกิดควันก่อน จึงทำให้สามารถตรวจพบเพลิงไหม้
ตั้งแต่ระยะแรก ช่วยให้สามารถแจ้งเหตุเพลิงไหม้ได้อย่างรวดเร็ว
Notifier RP-2002(E)
Agent Release Control Panel : ตู้ควบคุมระบบแจ้งเหตุเพลิงไหม้
RP-2002 is a UL listed six-zone fire alarm control panel for single and dual hazard agent releasing applications, providing fire detection, signaling and protection for commercial, industrial and institutional buildings requiring agent-based releasing.
ตู้ควบคุมระบบดับเพลิงอัตโนมัติ แบบ 6 โซน ผลิตภัณฑ์ของ Notifier By Honeywell จากประเทศสหรัฐอเมริกา ได้รับมาตรฐาน NFPA12, 12A, 12B และ 2001
Click to download Datasheet:
Notifier SD-651
Smoke Detectors : อุปกรณ์ตรวจจับควันไฟ
The Notifier SD-651 Plug-in Smoke Detectors offer superb performance and reliability in a profile which is just 2” (5.1 cm) deep. Model SD-651 (photoelectric sensor) can be used with a variety of different adapter bases in several wiring configurations and voltages. Other features include: low current draw, stable performance in high air velocities, built-in tamper resistant base design, remote LED option, removable cover, and built-in test switch
Features
• Identical appearance to standard NOTIFIER low-profile intelligent detectors. Sleek, low-profile design. • Same base for both ion and photo models. • Compatible with all System Sensor 400 Series products. • Two LEDs blink in standby and turn on steady in alarm. • Lower standby current. • Field sensitivity metering of detector to meet NFPA 72 Chapter 7 requirements. • Broad range of adapter bases available. • Dual LEDs provide 360° visibility. • Designed to meet the requirements of UL 268.
Specifications
• Operating voltage: mounting base dependent (see chart on page 2). • Standby current: 100 Microamps maximum. • Sensitivity: Ion: 1.9% ± 0.62%/ft.; Photo: 3% ± 0.7%/ft. • Weight: 3.67 oz. (104 g). • Size: 1.66" (4.22 cm) high; unflanged base 4.0 (10.16 cm) diameter; flanged base 6.2" (15.75 cm) diameter. • Construction: flame-retardant thermoplastic. • Operating temperature: 32°F to 120°F (0°C to 49°C). • European models: • Humidity range: 10% to 93% RH noncondensing.
Notifier P2RL, HWL, P2GWL, SGWL
Indoor Selectable-Output Horns, Strobes, and Horn Strobes for Wall Applications
The L-Series offers the most versatile and easy-to-use line of
horns, strobes, and horn strobes in the industry with lower current draws and modern aesthetics. With white and red plastic
housings, standard and small footprint devices, and plain,
FIRE-printed devices, L-Series can meet virtually any application
requirement.
Click to download Datasheet:
Features
- L-Series offers lower current draw across all settings
- One model with field-selectable candela settings:
- Wall: 15, 30, 75, 95, 110, 135, 185
- Ceiling: 15, 30, 75, 95, 115, 150, 177
- Automatic selection of 12- or 24-volt operation at 15 and 30 candela
- 2-Wire and 4-Wire Horn Strobe options. 4-Wire provide full independant control of the Horn and Strobe.
- Rotary switch for five selectable tones with high and low volume settings
- Plug-in design with minimal intrusion into the back box
- Mounting plate shorting spring feature checks wiring continuity before device installation
SPECIFICATIONS
- Standard Operating Temperature 32°F to 120°F (0°C to 49°C)
- Humidity Range 10 to 93% non-condensing
- Strobe Flash Rate 1 flash per second
- Nominal Voltage Regulated 12VDC or regulated 24DC/FWR
- Operating Voltage Range 8 to 17.5V (12V nominal) or 16 to 33V (24V nominal)
- Electrically compatible with System Sensor Sync Circuit listed to UL 464
- Compatible with previous designs dating back to 1997
- Input terminal wire gauge 12 to 18 AWG
System Sensor SSM/SSV Series
Series Electronic Bells : Audio/Visual Appliances
System Sensor alarm bells deliver high sound pressure output for fire signaling needs. Models are available for 120VAC and 24VDC operating voltages and are offered in 6, 8, and 10-inch sizes.
กระดิ่งแจ้งเหตุ กระดิ่งไฟฟ้า กระดิ่งเตือนภัย สำหรับต่อเข้าระบบตู้คอนโทรลแจ้งเหตุเพลิงไหม้
Click to download Datasheet:
Features
• Approved for indoor or outdoor (with WBB backbox) use.
• Low current draw.
• High dB output.
• Three sizes available: 6″ (15.24 cm), 8″ (20.32 cm), and
10″ (25.40 cm) diameter.
• 24 VDC models; polarized for use with supervision circuitry.
• Bells mount directly to standard 4″ (10.16 cm) square electrical box.
Reliable Performance.
Reliable Performance. The SSM and SSV series provide loud
resonant tones. The SSM series operates on 24VDC and are motor driven, while the SSV series operates on 120VAC utilizing a vibrating mechanism.
Specifications
- Regulated voltage: 24 VDC.
- Operating voltage range: 116 to 33 VDC.
- Maximum Current: DC 31.1 mA/FWR – 53.5 mA.
Operating temperature range: –31°F (–35°C) to +150°F
(+66°C). - Termination: provided with two sets of leads for in/out wiring.
- Service use: Fire Alarm, General Signaling, Burglar Alarm.
Simplified Installation.
For indoor use, the SSM and SSV series mount to a standard four-inch square electrical box. For outdoor applications, weatherproof back box, model number WBB, is used.
Dimensions: 18 ¼” x 14 ½” x 4 ¾”
(483.6 mm x 368.3 mm x 120.7 mm)
JANUS JFS-C1
Releasing Control Panel
The Janus Fire Systems® JFS-C1 Releasing Control Panel is a flexible single-hazard releasing control panel that is well suited for a number of applications. The panel is listed for use with agent based fire suppression systems as well as pre-action and deluge sprinkler suppression systems.
The panel utilizes a microprocessor-based system that has 32 Standard Programs, which covers a majority of installations. The simple to follow Menu Structure programs the entire system in a matter of minutes. In addition to the Standard Programs, the panel allows custom programming to accommodate any installation.
Features
• Single-Hazard Operation
• Four Class B Initiating Circuits
• Two Class B Supervisory Circuits2
• Four Class B Output Circuits
• Programmable Cross Zoning
• Supervised Microprocessor
• 32 Character Alpha-Numeric LCD Display
• Custom Banner Message and Zone Description Text
• Custom Zone Description Text
• On Board Menu Driven Programming Controls
• Releasing Circuits Protected from False Activation
• Continuous or Timed Discharge
• 40 Event History Buffer
• Walktest with Automatic Time-Out
• Alarm, Trouble, Supervisory, and Waterflow Relays
• Optional Class A Initiating Zone and Output Module
• 34 Character LED Supplemental Display
• 32 Standard Programs in Panel Memory
• Password Protection for all Programming
• 24 Hour Clock
• Suitable for Agent or Water Based Extinguishing
• Programmable Pre-Discharge Timers1
• One Class B Abort Circuit1 (defaults to additional supervisory zone in water based mode.)
Click to download Datasheet:
MULTI HAZARD ADDRESSABLE CONTROL PANELS AVAILABLE INITIATING DEVICES
Conventional or Intelligent Smoke Detector
Explosion-Proof Releasing Station
Momentary Abort Station
Main/Reserve Station
Lock-Out Station
AUDIBLE AND VISIBLE DEVICES
Horn/Strobe
Bells
JANUS PS-24
Photoelectric Smoke Detector
Light Source: GaAIAs Infrared Emitting Diode
Rated Voltage: 17.7 – 33.0 VDC
Working Voltage: 15.0 – 33.0 VDC
Maximum Voltage: 42 VDC
Supervisory Current: 45 μA Max. at 24 VDC
Surge Current: 160 μA Max. at 24 VDC
Alarm Current: 150 mA Max. at 24 VDC
Ambient Temperature: 32°F (0°C) to 120°F (49°C)
Sensitivity Test Feature: Automatic Sensitivity window verification test.
Mounting: Refer to Janus Fire Systems® SB Series Smoke Detector Base series, datasheet DS1008.
Features
• Low profile, 1.8” high (with base)
• 2 or 4 wire base compatibility, relay bases
available
• Highly stable operation, RF/Transient protection
• Low standby current, 45 μA at 24 VDC
• Two built-in power/sensitivity supervision/alarm LED’s
• Non-directional smoke chamber
• Vandal resistant security locking feature
• Built-in magnetic go/no go detector test feature
• Removable smoke labyrinth for cleaning or replacement
• Automatic Sensitivity window verification function meets outlined requirements in NFPA 72, Chapter 7, Inspection, Testing and Maintenance.
Application
The PS-24 can be used in all areas where Photoelectric Smoke Detectors are required. The wide range smoke chamber makes the PS-24 well suited for fires ranging from smoldering to flaming fires. SB Series Style bases may be used with the PS-24.
Click to download Datasheet:
JANUS SG-42SK1
Die-Cast Metal Manual Pull Station
The SG-42SK1 is a single contact, key-reset, manual pull station designed to meet the requirements for many applications. It is constructed from a rugged, but lightweight, die-cast metal alloy for increased performance and longevity.
The SG-42SK1 is provided with one normally open contact connected to a terminal strip that can accommodate wiring from #22 to #12 AWG. Contacts are gold plated to minimize risk of corrosion. All models have been tested by UL and found in compliance with the pull force requirements of the Americans with Disabilities Act (ADA).
Features
• Dual Action
• Screw Terminal Connections
• DC and AC Voltage Contact Ratings
• Gold Plated Alarm Contacts
• Surface or Weatherproof Back-Box
• Deeper Back-Boxes Available to Provide More Space for Wire and/or Addressable Module.
Specifications
Temperature: -40°F to 150°F (-40°C to 65.6°C), 90% relative humidity @ 100°F (37.8°C)
Switch Rating: 2 Amp @ 125 VDC, 2 Amp @ 240 VAC
Pull Station Weight: 1.2 lbs (0.544 kg)
Pull Station Dimensions: 4 3/4” h x 3 1/4” w x 1.1” d (120.65 mm x 82.55 mm x 27.94 mm)
Surface-Mount Backbox Dimensions (P/N 18950): 4 3/4” h x 3 1/4” w x 2 1/4” d (outside); 2 1/8” d (inside) cast and sheet metal (120.65 mm x 82.55 mm x 57.15 mm; 53.98 mm)
Deep Surface-Mount Backbox Dimensions (P/N 18951): 4 3/4” h x 3 1/4” w x 2 3/4” d (outside); 2 5/8” d (inside) cast and sheet metal (120.65 mm x 82.55 mm x 69.85; 66.68 mm)
Color: Red with raised white letters, white “PULL” bar and white “PUSH” bar with raised red letters
Label Options¹: “FM-200 Release”, “Fire Alarm”, “CO2 Release”, “Fire System Release”
¹Each SG42-SK1 Station is shipped with all four label types.
Click to download Datasheet:
JANUS MAS-1
Momentary Abort Station
The Janus Fire Systems® MAS-1 Momentary Abort Station provides pushbutton activated system abort capabilities. Abort for the MAS-1 is achieved with a yellow deadman style mushroom head pushbutton. The MAS-1 has a stainless steel faceplate with functional markings and mounts to a standard UL Listed 2-gang switch box.
Features
• Deadman Style Abort
• SPST Contacts
• Flush or Surface Mount
• Mounts to Standard UL Listed 2-Gang Switch Box
Click to download Datasheet:
Specifications
Temperature: 32° to 120°F (0° to 49°C)
Humidity: 90% Relative Humidity at 100°F
Weight: 1.2 lbs (0.5 kg)
Dimensions: 5.25 in H x 5.31 in W x 2.95 in D
(133 mm x 135 mm x 75 mm)
Color: Face Plate – Stainless Steel with black lettering Mushroom Head Pushbutton – Yellow
Alarm Contacts (SPST) Rating: 4 amps at 30 VAC; 0.5 amps at 30 VDC
Terminal Connections: 2 x 16 AWG, 1 x 14 AWG
JANUS MRS-1
Main/Reserve Transfer Station
The Janus Fire Systems® MRS-1 Main/Reserve Transfer Station is used to transfer suppression system releasing circuits from a main supply to a reserve supply. The MRS-1 is a maintained toggle
switch with a ring pin and lead wire seal for additional security.
Features
• DualAction Operation
• Flush or Surface Mount
• Mounts to Standard UL Listed 2-Gang Switch Box
• DPDT Contact
Click to download Datasheet:
Specifications
Temperature: 32° to 120°F (0° to 49°C)
Humidity: 90% Relative Humidity at 100°F
Weight: 1.2 lbs (0.5 kg)
Dimensions: 5.25 in H x 5.31 in W x 2.31 in D
(133 mm x 135 mm x 58.6 mm)
Color: Face Plate – Stainless Steel with black lettering
Alarm Contacts (SPST) Rating: 4 amps at 30 VAC; 0.5 amps at 30 VDC
Terminal Connections: Ring Terminal, 14-18 AWG, #6
JANUS LOS-1
Keyed Lock-Out Station
The Janus Fire Systems® LOS-1 Keyed Lock-Out Station provides a keyed method to disconnect and electrically lock-out the releasing circuit of a fire suppression system. The LOS-1 comes with a key that is removable in either the normal or locked-out position. The LOS-1 has a stainless steel faceplate with functional markings and mounts to a standard UL Listed 2-gang switch box.
Features
• DualAction Operation
• Flush or Surface Mount
• Mounts to Standard UL Listed 2-Gang Switch Box
• DPDT Contact
Click to download Datasheet:
Specifications
Temperature: 32° to 120°F (0° to 49°C)
Humidity: 90% Relative Humidity at 100°F
Weight: 1.2 lbs (0.5 kg)
Dimensions: 5.25 in H x 5.31 in W x 3.46 in D
(133 mm x 135 mm x 88 mm)
Color: Face Plate – Stainless Steel with black lettering
Alarm Contacts (SPST) Rating: 4 amps at 30 VAC; 0.5 amps at 30 VDC
Terminal Connections: 2 x 16 AWG, 1 x 14 AWG
JANUS HS-24WR
Horn/Strobe
The HS-24WR is a low profile horn/strobe combination that offers dependable audible and visual alarms and the absolute lowest current available.
The HS-24WR 24VDC offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela.
The Horn/Strobe offers a continuous or sync temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by the use of switches.
Features
• 24VDC units have field selectable candela options of 15, 30, 60, 75, & 110
• Super-Slide® Bracket - Ease of Supervision Testing
• Checkmate® - Instant Voltage Verification
• Synchronize strobe and/or horn with AVSM Control Module
• Prewire entire system, install mounting bracket, then install signals
• Documented lower installation and operating costs
• Input terminals accept 12 to 18 AWG
• Switch selection for high or low dBA
• Switch for chime, whoop, mechanical and 2400Hz tone
• Tamperproof re-entrant style grill
• Switch for continuous or temporal 3 tone (not available on whoop tone)
• Surface mount with the AVBB (Surface Mount Back Box) or mount to a standard single gang or double gang box or double workbox
• Silence audible while visual appliance will remain flashing (for use in accepted jurisdictions)
Dimensions
• 5" (12.7 cm) height x 4.5" (11.43 cm) wide x 2.5" (6.35
cm) deep
Operating temperature
• 32°F to 120°F (0°C to 49°C). The HS-24WR is not listed for outdoor use. Use models HS-24WR-WP (P/N 98397) or HSLP-24WR-WP (P/N 98398)
Click to download Datasheet:
JANUS PBA-AC, MBA-DC
กระดิ่งแจ้งสัญญาณเตือนภัย JANUS
These vibrating type bells are designed for use as fire, burglar or general signaling devices. They have low power consumption and high decibel ratings. The unit mounts on a standard 4” (101mm) square electrical box for indoor use or on a model BBK-1 weatherproof backbox for outdoor applications.
Specifications
Sizes Available: 6” (150mm), 8” (200mm) and 10” (250mm)
Voltages Available: 120VAC 24VDC (20.4 to 31.2) Polarized
Service Use: Fire Alarm, General Signaling, Burglar Alarm
Environment: Indoor or outdoor use (Outdoor use requires weatherproof backbox.)(-40° to 66°C)
Termination: AC Bells - 4 No. 18 AWG stranded wires, DC Bells - Terminal strip up to AWG #
Finish: Red powder coating
Optional: Model BBK-1 weatherproof backbox (P/N 18865),
Model BBX-1 deep weatherproof backbox (P/N 18866)
ALL DC BELLS ARE POLARIZED AND HAVE BUILT-IN TRANSIENT PROTECTION:
Click to download Datasheet: